Microsoft Networking & security

• Microsoft Networking & security Questions

• • A warning to others

    Once again, thank you for helping to educate me, Malke - I am trying to takeit all in!You will note ...

    By boaterdave

  • Stop wireless networking systray connection balloo...

    Is it possible to stop the wireless networking connectivity notificationballoon? Sometimes on a netw...

    By icccapital

  • Why does my notebook keep loosing the connection ?

    Advise please. My pc is connected to broadband via a BT Router. No problems.The notebook also connec...

    By pixelpup

  • Those animals are innocent in CHINA

    mms://a805.v9135e.c9135.g.vm.akamaistream.net/7/805/9135/0029/peta.download.akamai.com/9135/download...

    By bonnie

  • Silently Dropping UDP Packets

    I'm trying to publish a VoIP application running on the ISA Server 2004(SBS) server. Basically t...

    By david_brazier_me_uk

• • Stop error in WFP on Server 2008 beta3

    I was just testing my code on the Server 2008 beta3, and got a stop error. I attached a kernel debug...

    By jeremydrake, 7 Comments

  • Scan Schedule time

    -Hello all,I have installed MS Spy ware Beta on a few pc's. I can NOT Change the scanschedule ti...

    By theitman_at_olsbuff_com, 2 Comments

  • Acer 5633WLMI wireless not working

    HiI've just bought an Acer 5633WLMI notebook and can't get the wirelessworking. What I have ...

    By nicklelievre, 1 Comments

  • compatable

    how do i know if my laptop is wireless compatable...

    By hopeless, 1 Comments

  • ProSet vs. Cisco VPN vs. WEP

    Someday's I fancy myself as having a clue. Today is not one of them...The Hardware:- Dell Latitu...

    By rob, 4 Comments

• Microsoft Networking & security: is the Category's subject.It's has 1,550 questions,this is No.78 pages.
• I had the exact same problem
• Turn off eDNS on your DNS sever, or allow it on your firewall.here's how:http://www.nthelp.com/w2k3/turning_off_edns.htmFixed it for me immediately. Something specific to Yahoo.com i suppose."cn" wrote:> I have Windows Server 2003 with W2K workstations. This past week no> workstation o...
• kmcdermott, Sat, 13 Mar 2010 20:27:00 GMT, 697 bytes, 1 Answer
• This Is the Worst
• I am in Safe Mode to get to this point. Previous steps:Microfost crash anderror...microsoft response to error was to go to safety.live.com site andrun the the Beta version, it worked fine and identified 3 Virus found 12files infected 1 virus 1 file already cleaned however when the page came upto...
• lionsdontruleanymore, Sat, 13 Mar 2010 17:21:00 GMT, 1,992 bytes, 2 Answer
• This version of Microsoft Antispyware have expired as of 31/7/2006
• Hi there, my Windows XP Pro system is being created with two profiles,previously I have this problem in one of the profile (e.g. profile A) but wasresolved when I reinstall it. But recently when I use another profile (e.g.profile B) I will have this message whenever I click the MicrosoftAntispyw...
• patquek, Sat, 13 Mar 2010 11:13:00 GMT, 555 bytes, 1 Answer
• Compatability of VBA 6.3 and Visual Studio/Visual Basic 2005 Express
• To Whom It May Concern: I am about to study Visual Basic for Applications and I entered the article "Visual Basic for Applications 6.3 Features" (http://msdn.microsoft.com/isv/technology/vba/features/default.aspx), and apparently VBA 6.3 is on "parity with Visual Basic 6.0". ...
• igfet909, Fri, 12 Mar 2010 20:45:00 GMT, 1,167 bytes, 2 Answer
• remote connection problem
• I have 3 computers at my work place connected with each other via wirelessrouter of Linksys. All three talks with each other very well.I have another set up of 3 computer at home connected with each other viarouter of Linksys. These three also talks with each other. But when I try toconnect from...
• waseem, Fri, 12 Mar 2010 12:14:00 GMT, 853 bytes
• Upgraded to ISA 2006 from ISA 2004, now Office communicator no longer works
• I recently upgraded from ISA 2004 to 2006. All my access rules are still inplace but can no longer get office communicator 2005 to work, other IMprograms work fine. If I VPN into my corporations network, communicatorworks. So I am guessing that ISA 2006 does some further filtering (SIPmaybe?) th...
• bradv, Fri, 12 Mar 2010 04:19:00 GMT, 391 bytes
• Stopping start up programs like I used to using Win98's msconfig.e
• How do I stop programs like iI did using msconfig.exe. I have Win2K ProEdition now.I can't believe I can't figure this out!...
• smccarthy735, Fri, 12 Mar 2010 02:46:00 GMT, 143 bytes, 1 Answer
• critical security updates for ME caused blue screen
• I let the automatic updates feature for windows ME install 4 critical updatesyesterday and now can't boot. The error is something like - an error hasoccured error: 06:0200:0000082E and stops loading the operating system afterthe start key and taskbar show up on the empty desktop. I haven'...
• richard, Thurs, 11 Mar 2010 23:32:00 GMT, 766 bytes, 5 Answer
• ProvisioningMethodPointCut.LeaveMethod
• Hi,I am trying to get WES working, when exploring the provisioning part I found ProvisioningMethodPointCut.LeaveMethod() method internally sends message back to the caller of Provisioning interface. Can anyone tell me why does ProvisioningMethodPointCut.LeaveMethod() needs to generate a message ...
• ashishmalhotra, Thurs, 11 Mar 2010 23:29:00 GMT, 358 bytes, 1 Answer
• Upgrade from ISA 2000 to ISA 2004
• http://www.microsoft.com/windowsserver2003/sbs/downloads/sp1/default.mspxJim Harrison (ISA SE)This posting implies no warranty and confers no rights."Kashif" <kashif@no-spam.justfone.com> wrote in messagenews:ealWR3AgHHA.3412@TK2MSFTNGP02.phx.gbl...Hi,I am running SBS 2003 Enterprice editi...
• jimharrison_isase, Thurs, 11 Mar 2010 16:49:00 GMT, 593 bytes, 1 Answer
• Acquire an IP with WEP
• I asked this in a previous thread, but don't think I explained it well enough.I am having problems aquiring a network address when I have WEP enabled onthe Access Point.With no WEP, it connects instantly, and I am assigned an IP via the AP'sDCHP server. It connects easily using Wireless...
• kevintaylor, Thurs, 11 Mar 2010 09:07:00 GMT, 722 bytes, 3 Answer
• CRM 3.0 : Changed Contact view under customization but CRM do not reflect
• Changed contacts view in advanced find, lookup, active view, my active views under settings: customizationbut CRM did not reflect the changesanyone can help to resolve?ThanksHee Teck...
• dreamerz, Thurs, 11 Mar 2010 07:24:00 GMT, 217 bytes
• Linksys WAP54G on Windows 2000 IAS (Radius)
• Hi!I need to setup a wireless network using Linksys WAP54G v3 thru a radiusserver (windows 2000 server AD). It seems my setup didn't work thru:http://www.windowsnetworking.com/kba...1xclients.htmlHope that you'll support me on this.Me...
• hbb, Wed, 10 Mar 2010 19:12:00 GMT, 461 bytes, 3 Answer
• Throttle Users
• Throttle UsersI need a way to throttle by users in a big way; as they are using much of myT1 link.My 1st thought was to have some managed switch do this type of work but thenagain my users are under one IP address with ISA 2000 on top of them like ayellow sun dress worn by an attractive woman. S...
• mr_backup, Wed, 10 Mar 2010 09:58:00 GMT, 639 bytes, 1 Answer
• force ISA 2004-User to use proxy in a mixed enviroment
• hi !given situation:- isa2004 in active directory- clients are mostly windows, but also some mac/linux- admin-pc/critical server are windows (xp/2003)needed:- force regular user to use http/https/ftp ONLY via the proxy on the isa- have user/ips with the right to use nat directly to access intern...
• ralfhuelsmann, Wed, 10 Mar 2010 02:17:00 GMT, 597 bytes
• Why I can not open the port 80!
• >> I had added the record (allow TCP Inbound port 80, other default) in "IP> pcaket Fiters", it was no problem before.> but the remote computers can't browse my web pages now, but the local> computer (This ISA server) can browse.> Why I can't open the port 80,> How c...
• bill, Tues, 09 Mar 2010 17:18:00 GMT, 37,060 bytes
• Dialog Box Default Settings
• I am interested in changing the default fileopen view from "List" as Ipresently have to "Details" which is the view I am always changing to andwould like to just set the default to bring this view up as my systemdefault. There are quite a few others I also would like to change. These I amsure I...
• johnnylarue, Tues, 09 Mar 2010 17:16:00 GMT, 564 bytes
• "Intelligent Explorer"
• Help! I did a search for fonts and borders, DID NOT DOWNLOAD anything, butsomething called "intelligent explorer" installed itself on the computer. Itadded a toolbar to Internet Explorer, but I can't type in any addresses,can't access tools, and when I try to "add/remove programs" and se...
• twowills, Tues, 09 Mar 2010 16:48:00 GMT, 431 bytes, 1 Answer
• ThreadHijacker and WER report
• Hi, In my application I introduced AV thru code and getting a proper report. But, when I introduce AV using ThreadHijacker, GetModuleHandleExW() is unable to find the module handle. Report looks like as shown below. Problem Event Name: APPCRASH Application Name: Appln.exe Application ...
• dhon, Tues, 09 Mar 2010 14:53:00 GMT, 1,894 bytes, 2 Answer
• I found this great little site.
• <html><head><meta name="GENERATOR" content="Microsoft FrontPage 5.0"><meta name="ProgId" content="FrontPage.Editor.Document"><meta http-equiv="Content-Type" content="text/html; charset=windows-1252"><title>I found this great little site</title></head&...
• ifoundthisgreatlittlesite, Tues, 09 Mar 2010 08:45:00 GMT, 847 bytes
• «««6869707172737475767778